Storage heater not working

A storage heater that stays cold can have a supply, control or heater fault. TMB Electrics tests the electrical supply in Banstead and identifies what needs attention.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why is my storage heater not working?

A storage heater needs an overnight electricity supply and working controls to store heat. A fault can sit in the fixed electrical supply, the timer or meter arrangement, or the heater itself.

  • The overnight supply is not switching onMany storage heaters charge during off peak hours. A switched supply, timer or meter setting can stop the heater receiving electricity when it should charge.
  • The heater controls are set incorrectlyThe input control affects how much heat the heater stores. The output control affects how quickly stored heat is released into the room.
  • The fixed circuit has a faultA tripped protective device, failed connection or damaged cable can interrupt the electrical supply to the heater. Testing identifies whether the fixed circuit is the cause.
  • A part inside the heater has failedA failed thermostat, heating element or internal control can leave the heater cold even when the fixed electrical supply is present.

What can I check safely before booking?

You can check the controls and note the heater pattern without removing covers, opening the appliance or touching wiring.

  • Check the input and output controlsCheck that the input control is not set to its lowest setting. Note the output setting too, as a high output can release stored heat earlier in the day.
  • Note whether other storage heaters workCheck whether one heater or several heaters are affected. This helps show whether the problem may be limited to one appliance or its electrical supply.
  • Check the consumer unit without removing its coverLook for a breaker or RCD that is in the off position. Do not repeatedly reset a protective device that switches off again.

When should I book storage heater fault finding?

Book Now when a heater remains cold after its charging period, its supply will not stay on, or the fault affects more than one heater.

  • The heater stays coldA heater that does not warm after the overnight charging period needs its supply and controls checked.
  • A breaker or RCD tripsA protective device that switches off again can indicate a fault on the circuit or connected heater. Leave the affected circuit off where possible.
  • Several heaters are affectedMore than one cold storage heater can point to a shared switched supply, timer or meter arrangement that needs testing.

What happens when a storage heater is not heating?

The visit starts with the reported heater and its electrical supply, then testing separates a fixed wiring fault from a fault inside the appliance.

  • The supply arrangement is checkedThe consumer unit, switched supply and heater controls are checked against the reported fault.
  • The affected circuit is testedTesting checks whether electricity reaches the heater and whether the fixed circuit has a fault.
  • The fault is identifiedThe findings show whether the problem is in the fixed electrical installation or inside the storage heater.

What does storage heater fault finding cover?

The price covers the time needed to check the storage heater supply, controls and affected circuit. It changes when testing finds a fixed wiring repair, replacement electrical part or a fault within the heater itself.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing covers the electrical supply, controls and fixed circuit linked to the heater.
  • Fixed wiring repairs are priced once testing identifies the work needed.
  • A fault within the storage heater may need appliance repair or replacement.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Storage heater not working questions

Still have a question?

Why is my storage heater cold in the morning?

A storage heater may not have received electricity during its overnight charging period. The input setting, switched supply, timer, meter arrangement and electrical circuit can all affect whether it stores heat.

Can one faulty storage heater trip the electricity?

Yes, a fault in a storage heater or its electrical supply can cause a breaker or RCD to switch off. Leave the affected circuit off if it trips again, then arrange testing to identify whether the fault is in the fixed installation or the heater.

Do storage heaters need a separate electricity supply?

Many storage heaters use an off peak supply that switches on during set hours. The exact arrangement depends on the property, meter and electrical installation, so testing confirms how the heater is supplied.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7