Electric underfloor heating not working

Electric underfloor heating that will not warm needs its controls and electrical circuit tested. TMB Electrics traces the electrical fault in Banstead and identifies whether it sits at the controller, sensor or supply.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why is my electric underfloor heating not working?

Electric underfloor heating can stop warming when the controller, temperature sensor or circuit supplying the heating has developed a fault.

  • The controller is not calling for heatThe wall controller sets the floor temperature and tells the heating when to run. Incorrect settings, a failed controller or a lost supply can stop that instruction reaching the heating.
  • The floor sensor has failedA floor sensor measures the temperature beneath the finished floor. A failed sensor can give the controller the wrong reading and stop the heating from coming on as expected.
  • The heating circuit has switched offThe heating may have its own protective device in the consumer unit. A fault on that circuit can switch the supply off while other electrical equipment remains on.
  • A connection or heating cable has a faultA fault at a connection or in the heating cable beneath the floor can prevent the system warming. Testing distinguishes the control fault from a fault in the fixed electrical installation.

What can I check safely before booking?

You can check the controller display and note the heating pattern without opening equipment, removing covers or touching electrical wiring.

  • Check the controller settingCheck that the controller is on and set above the current room temperature. Note any warning symbol, error message or blank display for the visit.
  • Note which areas stay coldRecord whether the whole heated area stays cold or only part of it does. Note when the heating last worked and whether the controller shows it is calling for heat.
  • Look at the consumer unit without opening itCheck whether a switch for the heating circuit is in a different position from the others. Do not remove the consumer unit cover or touch anything inside it.

When should I book electric underfloor heating fault finding?

Book electrical fault finding when the controller is on but the floor remains cold, the heating circuit will not stay on, or the system shows an error.

  • The floor stays coldA controller that appears to run while the floor remains cold needs testing of the controller, sensor and electrical supply.
  • The heating circuit switches off againA protective device that switches off again can indicate a fault on the heating circuit. Leave the circuit unused until it has been tested.
  • The controller shows an errorAn error message or warning symbol can help identify whether the fault is with the controller, sensor or connected heating circuit.
  • Book NowBook electrical fault finding when the cause is unclear or the heating no longer responds to its controller.

What happens when electric underfloor heating is not working?

The visit starts with the controller and consumer unit, then tests the electrical supply and heating controls to identify where the fault sits.

  • The controller and circuit are checkedThe controller settings, displayed temperature and heating circuit are checked against the reported fault.
  • The electrical supply is testedThe heating circuit is made safe for testing. The supply, controls and sensor are checked to narrow the fault to the affected part.
  • The fault is explainedThe failed part or remaining investigation is explained once testing identifies the cause.
  • Repair work is pricedAny repair beyond the investigation is priced after the fault and required parts are known.

What does electric underfloor heating fault finding cover?

The price covers time spent testing the electric underfloor heating controller, sensor and electrical circuit to identify why the floor is not warming. The price changes if testing finds a failed controller, sensor, connection, heating cable or repair that needs replacement parts.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing covers the controls and electrical circuit linked to the cold floor.
  • Replacement parts and repair work are priced after the cause is known.
  • A fault in the heating cable beneath the floor may need further investigation before repair work is priced.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Electric underfloor heating not working questions

Still have a question?

Why is my underfloor heating controller on but the floor is cold?

The controller may be calling for heat while a sensor, electrical supply, connection or heating cable has a fault. Testing identifies whether the controller is receiving the right temperature reading and whether power is reaching the heating circuit.

Can a thermostat stop electric underfloor heating working?

Yes. The thermostat, also called the controller, tells the heating when to run. A failed controller or floor sensor can stop the system warming even when the electrical supply remains available.

Can I reset the underfloor heating circuit myself?

Do not keep resetting a circuit that switches off again. A repeated trip can indicate a fault on the heating circuit, so leave it unused and book electrical fault finding.

Does a cold floor always mean the heating cable has failed?

No. The controller, sensor and electrical supply need checking before the heating cable is identified as the cause. Testing separates those parts rather than replacing one on assumption.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7