Burning smell from the fuse box
A burning smell from a consumer unit needs the affected circuit left off. TMB Electrics traces the overheating connection or protective device and makes the installation safe.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why does a fuse box smell like burning?
A burning smell can come from heat building up at a loose connection, damaged protective device or overloaded circuit inside the consumer unit.
- A loose connection is overheatingA loose terminal creates resistance as electricity passes through it. That resistance creates heat and can discolour insulation or the consumer unit around the connection.
- A protective device has failedA circuit breaker or RCD is a safety switch that disconnects power when it detects a fault. Damage inside one of these devices can create heat and a burning smell.
- A circuit has a faultA damaged cable, socket, switch or fixed fitting can create a fault that places strain on the circuit connection at the consumer unit.
What can I check safely when the fuse box smells burnt?
Leave the consumer unit closed and do not touch any wiring. You can note the smell, identify what lost power and look for damage without handling electrical parts.
- Leave the affected circuit offIf a breaker or RCD has switched off, leave it off. Do not keep restoring power where there is a burning smell.
- Check for visible heat damageLook without touching for smoke, discolouration, melting or scorch marks around the closed consumer unit and nearby sockets or switches.
- Note what was runningWrite down which rooms lost power and what was in use when the smell started. This helps identify the circuit that needs testing.
When should I book for a burning smell from the fuse box?
Book Now when a consumer unit smells burnt, feels hot, shows smoke or has visible scorching. The affected circuit needs checking before it is used again.
- The burning smell remainsA continuing smell can mean a connection or protective device has overheated. Leave the circuit off until it has been tested.
- There is smoke or scorchingSmoke, melting or scorch marks around electrical equipment need immediate make safe work to isolate the danger.
- A circuit keeps switching offA breaker or RCD that will not remain on can indicate a fault on the circuit or connected equipment.
What happens when a consumer unit has a burning smell?
The visit starts by isolating the affected circuit, then testing the consumer unit and connected circuit to find where heat has developed.
- The affected circuit is isolatedThe consumer unit is checked to identify the circuit linked to the smell and prevent continued use while testing takes place.
- The consumer unit and circuit are testedTesting checks the protective device, terminals and circuit condition to identify the connection, cable or fitting causing the fault.
- The required repair is explainedAny damaged connection, protective device or circuit fault is identified before repair work is priced.
What does a burning smell from the fuse box visit cover?
The price covers investigation of the consumer unit, the affected circuit and the electrical parts linked to the burning smell. The price changes if testing finds damaged terminals, a failed protective device, a circuit fault, replacement parts or wider repair work.
From £375
Included when agreed
- A new metal consumer unit with RCD protection and surge protection
- Every existing circuit reconnected and labelled
- Testing of every circuit before the power goes back on
- An Electrical Installation Certificate, notified under Part P
Not included automatically
- Repairs to faults the testing finds on existing circuits
- New circuits, which are priced separately
- Upgrading the main earthing or bonding, if needed, which is quoted before the work
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the consumer unit and the circuit connected to the overheating.
- Replacement parts and repair work are priced after the cause is known.
- A consumer unit replacement is priced separately when the existing unit cannot remain in use.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowIs a burning smell from a fuse box dangerous?
Yes. A burning smell can mean an electrical connection or protective device is overheating. Leave the affected circuit off and arrange testing before it is used again.
Can I reset a breaker after a burning smell?
No. Do not reset a breaker or RCD where there is a burning smell, smoke, melting or scorch marks. The circuit needs checking before power is restored.
Can a loose wire make a consumer unit smell burnt?
Yes. A loose connection can heat up as current passes through it. Testing identifies whether the fault is at the consumer unit, on the circuit or at a connected fitting.
Related problems
- Fuse box in the bathroom: is it legal?A fuse box in a bathroom breaks the wiring regulations and needs moving to a dry place outside the room.
- Fuse box sparkingSparks from a consumer unit need the affected electrical installation checked urgently.
- Old fuse box: do I need to upgrade?An old fuse box needs testing before replacement, because the wiring behind it matters too.
- Signs your fuse box needs upgradingSigns an older fuse box needs testing or replacement before new electrical work.
- Still got rewirable fuses at home?Rewirable fuses need testing before a consumer unit replacement is planned.
- Unsatisfactory EICR: What Happens Next?C1, C2 and FI findings make an EICR unsatisfactory until the required work is addressed.
Sources
Updated 19 November 2026
