Signs your fuse box needs upgrading
An old fuse box may need replacing when it lacks modern safety protection, cannot serve planned circuits or shows damage. TMB Electrics upgrades consumer units in Banstead after testing the existing installation.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why does a fuse box need upgrading?
A fuse box, also called a consumer unit, protects the circuits in your home. Older units may not have the protection or capacity needed for the wiring and equipment connected to them.
- It has wire fusesWire fuses need replacing after a fault and older boards may not have modern protection against electric shock. A consumer unit upgrade replaces the old protective devices and labels each circuit.
- It has no RCD protectionAn RCD is a safety device that cuts power when electricity flows where it should not. Older boards may have circuit breakers but no RCD protection for the circuits in use.
- It is damaged or overheatingCracks, scorch marks, a burning smell or unusual warmth at the board need electrical testing. The affected circuit should stay unused until the cause has been checked.
- It has no room for planned circuitsAn electric shower, EV charger, kitchen refit or outbuilding supply may need its own protected circuit. The existing board and supply are checked before new work is connected.
What can I check safely before booking?
You can look at the outside of the closed consumer unit and note what it supplies. Do not remove the cover, touch wiring or reset a protective device that keeps switching off.
- Read the circuit labelsNote any labels that are missing, handwritten or unclear. List the rooms, sockets, lights and fixed equipment that each marked circuit appears to serve.
- Look for visible damageCheck from a distance for cracks, scorch marks, smoke, a burning smell or unusual warmth. Stop using the affected circuit if any of these signs are present.
- List planned electrical workNote any planned EV charger, electric shower, kitchen appliance, garden building or extra socket. This helps identify whether the board needs capacity for another circuit.
When should I book a fuse board upgrade?
Book a consumer unit assessment when the existing board lacks modern protection, shows damage or needs to support new electrical work. Testing establishes whether the connected circuits can be retained.
- The board has wire fusesA board with replaceable wire fuses is an older arrangement that needs assessment before further electrical work is added.
- An EICR identifies concernsAn Electrical Installation Condition Report can identify concerns with the consumer unit, protective devices, earthing or connected circuits that need further work.
- A circuit keeps trippingA circuit that will not remain on needs fault finding before a replacement board is fitted. A new consumer unit does not repair a fault on an existing circuit.
What happens during a consumer unit upgrade?
The visit begins with tests on the existing circuits, then the old board is replaced and the completed installation is tested before power is restored.
- The existing circuits are testedThe circuits, earthing and bonding are checked before the board is changed. Any fault found on an existing circuit is identified before replacement work proceeds.
- The old board is replacedThe old consumer unit is removed and the existing circuits are reconnected into the new unit. Each circuit is labelled so it can be identified later.
- The installation is testedThe completed installation is tested before power is restored. The work is completed with the documentation it requires.
What does a fuse board upgrade price cover?
The price covers the consumer unit replacement work, including fitting the new board, reconnecting existing circuits, testing the installation and completing the documentation the work requires. The price changes if testing identifies faults on existing circuits, or if earthing and bonding work is needed.
From £375
Included when agreed
- A new metal consumer unit with RCD protection and surge protection
- Every existing circuit reconnected and labelled
- Testing of every circuit before the power goes back on
- An Electrical Installation Certificate, notified under Part P
Not included automatically
- Repairs to faults the testing finds on existing circuits
- New circuits, which are priced separately
- Upgrading the main earthing or bonding, if needed, which is quoted before the work
Ways to pay


- Pay by bank
- Bank transfer
- Fault finding and repairs to existing circuits are priced separately when testing identifies them.
- Extra circuits for an EV charger, shower, kitchen or outbuilding change the price because they need their own installation work.
- Earthing and bonding work changes the price when the existing installation needs it.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowDoes a new consumer unit fix old wiring?
No. A new consumer unit improves the protection at the board, but it does not repair faults in existing cables, sockets, switches or fittings. Each circuit is tested before it is reconnected, and any fault found is identified separately.
Can I keep my existing circuits with a new fuse box?
Existing circuits can be reconnected when testing shows they are suitable. If a circuit has a fault, the required repair is identified before it is put onto the new consumer unit.
Will the power be off while the fuse box is changed?
The power is off while the consumer unit is replaced and tested. Each circuit is then checked before power is restored.
Does an EV charger mean I need a new fuse box?
Not always. The consumer unit, supply, earthing and available capacity are checked to establish whether the charger needs a board upgrade or a separate arrangement.
Related problems
- Burning smell from the fuse boxA burning smell at the consumer unit can mean an overheating connection or protective device.
- Fuse box in the bathroom: is it legal?A fuse box in a bathroom breaks the wiring regulations and needs moving to a dry place outside the room.
- Fuse box sparkingSparks from a consumer unit need the affected electrical installation checked urgently.
- Old fuse box: do I need to upgrade?An old fuse box needs testing before replacement, because the wiring behind it matters too.
- Still got rewirable fuses at home?Rewirable fuses need testing before a consumer unit replacement is planned.
- Unsatisfactory EICR: What Happens Next?C1, C2 and FI findings make an EICR unsatisfactory until the required work is addressed.
Sources
- Electrical Safety First: Replacing a consumer unit
- IET: BS 7671 Guidance Publications
- GOV.UK: Building work replacements and repairs
Updated 19 November 2026
