Electrical fire: what to do
If an electrical fire starts, get everyone out, stay out and call 999. TMB Electrics can make the affected electrical installation safe after the fire service has dealt with the fire.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
What can cause an electrical fire at home?
An electrical fire can start when a damaged connection, cable or plug in item overheats. Smoke, a burning smell and scorch marks all need the affected electrical supply left unused.
- A damaged plug or leadA damaged plug, lead or extension lead can overheat where electricity passes through a loose or damaged connection. Do not use an item with scorch marks, cracking or a burning smell.
- An overloaded extension leadToo many high demand items on one extension lead can cause the plug, socket or lead to overheat. Use fixed sockets for appliances that draw a large electrical load.
- A loose connection in a fittingA loose connection in a socket, switch, light fitting or consumer unit can create heat. The heat can damage the surrounding fitting and wiring.
- Damaged fixed wiringDamage to fixed wiring can cause overheating or a fault on the circuit. The damaged section needs electrical testing before the circuit is used again.
What can I check safely after an electrical fire?
After everyone is safe and the fire service has dealt with the fire, only check what can be seen without touching electrical equipment. Leave appliances, sockets, switches and the consumer unit closed.
- Note where the fire startedNote whether the fire involved a plug in appliance, socket, light fitting, extension lead or another visible electrical item. This helps identify the circuit that needs checking.
- Photograph visible damage from a distancePhotographs can show scorch marks, smoke damage and the affected area without handling damaged equipment. Do not move or take apart the item that caught fire.
- Keep damaged equipment unusedLeave the affected appliance, plug, socket or fitting unused. Do not reconnect an appliance or restore use of a circuit until the fixed installation has been checked.
When should I book electrical work after a fire?
Book Now after the fire service has dealt with the fire and the electrical installation needs making safe or testing. A damaged circuit or fitting needs checking before it returns to use.
- A socket, plug or fitting is scorchedScorching around a socket, plug, switch or light fitting can mean heat has damaged the connection behind it. The affected circuit needs testing and making safe.
- A circuit has tripped or stayed offA circuit that has switched off after an electrical fire needs checking before it is restored. The cause may be in the fitting, cable or connected item.
- Smoke affected the consumer unitSmoke or heat around the consumer unit needs electrical assessment before circuits are used. The consumer unit and the circuits it protects may need testing.
What happens when TMB Electrics visits after an electrical fire?
The visit starts with the damaged area and the electrical circuit that supplied it. The affected part is made safe before testing establishes what repair is needed.
- The damaged circuit is identifiedThe affected socket, fitting or appliance connection is matched to its circuit at the consumer unit. This identifies which part of the installation needs to stay isolated.
- The electrical danger is made safeThe damaged circuit, fitting or connection is isolated so it cannot remain in use. Safe circuits can remain available where they are separate from the damage.
- The fixed wiring is testedTesting checks the circuit, protective device and visible damaged electrical parts. This separates a fault in the fixed installation from a fault in a connected appliance.
- The repair is set outThe damaged electrical parts and the work needed are explained after testing. Repair work is priced once the required parts and work are known.
What does electrical fire make safe work cover?
The price covers attendance to identify the immediate electrical danger, isolate the affected circuit or fitting, and test the damaged part of the fixed installation. The price changes when fire damage reaches more than one circuit, needs replacement parts, or requires repair work after the installation is made safe.
From £150
EICR — domestic: from £150
EICR — commercial: from £150
Included in the inspection
- Consumer unit, circuit protection and RCDs
- Fixed wiring and every circuit
- Sockets, switches, lighting and fixed appliances
- Earthing and bonding
- A written report with any findings coded C1, C2, C3 or FI
Not included automatically
- Portable appliances, which are PAT testing
- Repairs, which are quoted separately once the report is done
- Anything that cannot be reached safely on the day
Ways to pay


- Pay by bank
- Bank transfer
- Making safe covers isolation of the affected electrical danger and checks on the circuit involved.
- Replacement sockets, switches, fittings, cables or consumer unit work are priced after the damaged parts are identified.
- A fault inside a plug in appliance may need separate repair or replacement.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowWhat should I do if an electrical fire starts?
Get everyone out of the property, stay out and call 999. Do not go back for belongings or touch the appliance, socket, fitting or consumer unit involved.
Can I use water on an electrical fire?
No. Do not use water on an electrical fire. Get everyone out, stay out and call 999 so the fire service can deal with the fire.
Can I use the circuit again after a small electrical fire?
No. A small fire can damage connections, insulation and electrical fittings that cannot be checked by looking at the surface. The affected circuit needs making safe and testing before it returns to use.
Can TMB Electrics repair electrical fire damage?
TMB Electrics can make the affected circuit safe and test the fixed wiring after the fire service has dealt with the fire. Any repair beyond making safe is set out after the damaged electrical parts are identified.
Related problems
- Aluminium wiring in the houseAluminium wiring needs inspection and testing before any repair, upgrade or added circuit.
- Buying a house with old electricsAn EICR checks the fixed wiring so you know its condition before buying.
- Flooded electrics after leak or floodWater damaged electrics need testing before affected circuits, fittings or fixed equipment are used again.
- House not up to electrical regulationsAn EICR identifies fixed wiring that needs repair, improvement or further investigation.
- How to tell if your house needs rewiringAn EICR can show whether fixed wiring needs rewiring, partial renewal or repair.
- Is my metal fuse box safe?A metal fuse box needs inspection when its condition, protection or connected circuits are unknown.
Sources
- HSE: Electrical safety at work
- Electrical Safety First: Safety guidance
- GOV.UK: Fire safety in the home
Updated 19 November 2026
