How to tell if your house needs rewiring

TMB Electrics uses an EICR to check whether ageing or damaged fixed wiring in a Banstead home needs rewiring, partial renewal or another repair.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why might a house need rewiring?

A house may need rewiring when its fixed cables, connections or circuit protection no longer suit their condition or the way the property is used.

  • Ageing cable insulationOlder cable insulation can deteriorate with age and use. Rubber, lead or fabric covered wiring needs checking because its condition cannot be judged from the consumer unit alone.
  • Repeated faults or overheatingRepeated tripping, loose connections, scorch marks or unusual warmth can point to a problem on the fixed installation. Testing identifies whether a repair or wider renewal is needed.
  • Alterations made over timeExtensions, kitchens and later additions can leave an installation with circuits from different periods. An inspection checks how the retained and newer wiring work together.
  • Unsatisfactory inspection findingsAn EICR can identify damage, deterioration, defective work, missing earthing or bonding, and other findings that need attention.

What can I check safely before booking?

You can note visible signs and the pattern of the problem without opening a fitting, removing a cover or touching mains wiring.

  • Look at sockets and switchesNote any cracking, scorch marks, discolouration, burning smell or unusual warmth. Leave any damaged fitting unused.
  • Note faults and power cutsWrite down which rooms, lights or sockets are affected, what was happening when the problem began, and whether a circuit keeps switching off.
  • Check the consumer unit labelsRead the circuit labels without removing the cover. A photograph of the closed consumer unit can help show which circuits need checking.

When should I book an EICR?

Book an EICR when the fixed wiring needs checking before a rewire, after concerning faults, or when the condition of an older installation is unknown.

  • The installation has not been checkedAn EICR checks the fixed wiring, consumer unit, sockets, switches, lighting, earthing and bonding, then records the condition in writing.
  • Faults keep returningRepeated trips, dead circuits, flickering lights or heat damage need testing to establish whether they come from one fault or wider wiring condition.
  • You are planning major workA rewire, kitchen refit or extension benefits from checking the existing installation before new circuits and accessories are planned.

What happens during an EICR visit?

The visit checks the fixed installation in stages so the condition of the wiring and its protective devices can be recorded.

  • The installation is inspectedThe consumer unit, accessible fixed wiring, sockets, switches, lighting, earthing and bonding are checked.
  • Circuits are testedCircuits are isolated and tested in stages, then restored as testing moves through the installation.
  • Findings are recordedThe EICR records observations about the condition of the installation and identifies any work that needs further attention.
  • Rewiring options are explainedWhere the condition of the fixed wiring calls for more work, the next work can be priced after the findings are known.

What does an EICR price cover?

The price covers inspection and testing of the fixed electrical installation, followed by the written EICR. The price changes with the number of circuits, access to the installation and any separate repair or rewiring work identified during testing.

From £150

EICR — domestic: from £150

EICR — commercial: from £150

Included in the inspection

  • Consumer unit, circuit protection and RCDs
  • Fixed wiring and every circuit
  • Sockets, switches, lighting and fixed appliances
  • Earthing and bonding
  • A written report with any findings coded C1, C2, C3 or FI

Not included automatically

  • Portable appliances, which are PAT testing
  • Repairs, which are quoted separately once the report is done
  • Anything that cannot be reached safely on the day

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • The EICR covers inspection and testing of the fixed installation, not repairs to faults found during the visit.
  • A partial rewire, full rewire or consumer unit work is priced separately once the condition of the existing wiring is known.

View the EICR cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

House rewiring questions

Still have a question?

How do I know if my house needs rewiring?

Ageing cable insulation, repeated faults, damaged fittings and unsatisfactory EICR findings can all show that wiring needs attention. An EICR checks the fixed installation and separates a repair from partial or full rewiring.

Does an old fuse board mean my house needs rewiring?

Not always. The consumer unit and the wiring behind it are separate parts of the installation, so testing is needed to establish whether the existing circuits can remain in use.

Can only part of a house be rewired?

Yes, where testing shows that selected circuits need renewal while other parts of the installation remain suitable. The findings identify which circuits and accessories need work.

What should I do if a socket smells of burning?

Stop using the socket and leave the affected circuit off if it is already off. A burning smell, scorching or unusual warmth needs electrical testing before the fitting or circuit is used again.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7